EVGA Hadron Air User's Guide download pdf (Page 4)

6 7

Removing the Side Panel

Installing the Motherboard

Installing the Hard Drive

Equipment

The following accessories are included with the Hadron Chassis:

Parts Descriptions

▪ EVGA Hadron Chassis

The star of the show!

▪ 8pcs M3 x 5mm

These screws are used for the

motherboard, and 2.5” hard drives.

▪ 4pcs M2 x 2.5mm

These screws are used for the

optical disc drive and are

optional.

▪ Power Cable

Connects to an AC power source.

▪ SATA Cable x 2

Use these to connect your hard

drive

▪ Optical Disc Drive Tray

A tray for your slim slot load

optical drive.

▪ Manual

All the important information. You

should know, you are reading it

right now!

▪ Losen the screws with a phillips screwdriver.

▪ Slide the side panel off in a straight motion.

▪ Lay the motherboard at a 45 degree angle

inside the chassis and ensure the screw holes

lineup with the standoffs.

▪ Tighten the screws.

▪ Pull out the removable hard drive tray by

squeezing together the outer clips.

▪ For 2.5in hard drive: Attach 4 screws to the

bottom of the hard drive tray.

▪ For 3.5in hard drive – Stretch each side of the

hard drive tray and insert the drive.

▪ Slide in the hard drive tray.

English English

1 2 3 4 5 6 7 8 9 ... 37 38

No comments

EVGA Hadron Air User's Guide Page 4