6
1500W Power Supply User Manual
Advanced Features
VOLTAGE AND CURRENT MONITORING
EVGA SuperNova software allows you to monitor your power supply’s performance in real time, so you can
gauge your system’s power usage and your power supply’s health. SuperNOVA allows you to monitor up to six
performance characteristics at once, including the voltage of all rails, output current, input current and voltage, fan
speed, power consumption, efficiency, and more! Finally, you can adjust the output of your +12V rail from 11.8V to
12.6V or anywhere in-between for maximum overclocking performance. SuperNova can be downloaded at
EVGA.com
OVERCLOCK YOUR POWER SUPPLY
At EVGA, we know that squeezing the best performance out of your system sometimes means taking risks.
Therefore we offer the ability to raise the trip point of this unit’s Over Power Protection, to allow the unit to be
overloaded to a degree. In effect, your 1500W power supply becomes a 1650W power supply, allowing you to
push your system to its limits. You can enable this feature through our SuperNOVA software, or by manual switch
located on the power supply next to the on/off switch – DIP switch #2.
Note: EVGA “OC Mode” will only work with 230VAC input. If user activates OC Mode on 115VAC input the OC
Mode will be disabled and the Over Current and Over Power protections will remain set at 1500W.
SINGLE / MULTIPLE RAIL TOGGLE
The NEX-1500 CLASSIFIED comes with Over Current Protection on the +12V rail enabled by default, dividing it into
eight 20A (240W) +12V rails. This protects your system and the power supply from overloading and certain types
of short circuit. This protection should normally be invisible to overclockers and has no effect on power supply
performance or efficiency. However, under extreme conditions it may be possible to trip the multi-rail +12V OCP
on accident, causing the power supply to shut down. In these situations we allow you to disable multi-rail +12V
OCP, turning it into a single rail power supply. This can be done through our SuperNOVA software, or by manual
switch located on the power supply next to the on/off switch – DIP switch #3.
MANUAL FAN CONTROL
The NEX-1500 CLASSIFIED has a PWM controlled fan that balances cooling performance and efficiency versus
noise and fan wear. However, fan control is fully adjustable via our SuperNOVA software. (NOTE: If a low fan speed
is insufficient to keep the power supply cool, user input may be overridden to prevent unit Over Temperature
shutdown). If noise levels and fan wear are not a concern for you, you can manually set the fan speed to 100% via
a manual switch located on the power supply next to the on/off switch – DIP switch #4.
8. Connect the AC power cord to your power supply and to
the wall, and turn the power switch to the ON position.
(18 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals