EVGA 132-YW-E178-A1 User's Guide Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 85
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 39
EVGA 30
IDE Channel and SATA Channel
Use these functions to detect and configure the individual IDE and SATA channels. Select a
channel and press
Enter to display the IDE/SATA sub-menu.
Press
Enter to auto-detect IDE and SATA channels in the system. Once the channel is
detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and Sector are
automatically filled in.
None
There is no HDD installed or set.
Auto
The system can auto-detect the hard disk when booting up.
Manual
When you set the channel to [Manual] and change Access Mode to [CHS], you can then
enter the number of cylinders, heads, Precomp, landing zone, and sector. You can manually
enter the values or you can press
Enter to display a window that tells you the min and max
values.
IDE Auto-Detect [Press Enter]
Extended IDE Drive [None}
Access Mode Auto
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
IDE Channel 0 Master [None]
IDE Channel 0 Slave [None]
SATA 1 (A0) [None]
SATA 2 (A1) [None]
SATA 3 (B0) [None]
SATA 4 (B1) [None]
SATA 5 (C0) [None]
SATA 6 (C1) [None]
Press ENTER to display
IDE Channel sub-menu
IDE HDD Auto-Detect [Press Enter]
IDE Channel 0 Slave [Auto}
Access Mode [Auto]
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
Press ENTER to display
SATA Channel sub-menu
Page view 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 84 85

Comments to this Manuals

No comments