EVGA 132-YW-E178-A1 User's Guide Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 85
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
EVGA 46
Set this to [Enabled] if you have installed a new add-on and the system reconfiguration has
caused a serious conflict that prevents the OS from booting. The default setting is
[Disabled].
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if the BIOS can
automatically configure all the boot and plug-and-play compatible devices or if you can
manually select IRQ, DMA, and memory base address fields. Select
[Auto(ESCD)] if you
want the BIOS to automatically populate these fields. If you select
[Manual] so you can
assign the resources,
IRQ Resources is enabled for input.
IRQ Resources
To enable this field for input, set Resources Controlled By to [Manual]. With this
field enabled, press
Enter to see options.
Use Legacy ISA for devices compliant with the original PC AT Bus specification. Use
PCI/ISA PnP for devices compliant with the plug-and-play standard, whether designed for
PCI or ISA Bus architecture.
PCI/VGA Palette Snoop
This function on the PnP/PCI Configuration menu allows you to enable or disable the
Palette Snoop function.
IRQ-5 assigned to [PCI Device]
IRQ-9 assigned to [Reserved]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
IRQ-14 assigned to [PCI Device]
IRQ-15 assigned to [PCI Device]
Resources Controlled By [Manual)]
IRQ Resources [Press Enter]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter
Page view 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 84 85

Comments to this Manuals

No comments